Skip to content
Showtec NET-8/5 available for hire from The Cloud One Group Birmingham

Showtec NET-8/5

Specifications

  • 8 DMX universes (4,096 channels), in or out
  • 8 x 5-pin XLR, 2 x RJ45
  • 1 U 19-inch, 2.22 kg; 100-240 V, 20 W max

The Showtec NET-8/5 is a 1U 19-inch network node that converts Art-Net, sACN and Kling-Net to DMX512 across eight isolated universes, each port configurable as an input or an output. Connections are 8 x 5-pin XLR with signal LEDs, two RJ45 ports on a built-in gigabit switch so nodes can be chained, and a Pro Power connector. Setup is from the front-panel LCD and buttons, with single, HTP or LTP merging and automatic changeover to a backup universe. It draws up to 20 W from 100-240 V and weighs 2.22 kg.

Available for hire across Birmingham and the UK. Need advice? Call 0121 333 7711 or send an enquiry.

More Lighting Equipment

Avolites Tiger Touch Pro

Avolites Tiger Touch Pro

The Avolites Tiger Touch Pro is a touchscreen lighting console running the Titan operating software, listed by Avolites as the LV-67H hardware version of the Tiger Touch (serial numbers TT-01220 to TT-01615). The console outputs 12 DMX universes and 6,144 channels, and can be extended to 64 universes with a Titan Net Processor, with Art-Net and CITP support. The rear panel carries four DMX outputs on XLR, MIDI in and out and an SMPTE input. Twenty submasters hold cues, cue lists and chases, alongside ten macro buttons and 1,000 virtual playback executors.

View details →
Robe Led Beam 150

Robe Led Beam 150

The Robe LEDBeam 150 is a compact LED moving head using 7 x 40 W RGBW multichip LEDs behind a motorised zoom covering 3.8° to 60°. Pan is 450° and tilt 228°, and it runs DMX-512 and RDM in two modes of 22 or 16 control channels, with 8 or 16-bit resolution on pan/tilt, colour, zoom and dimmer. Colour mixing can be RGBW or CMY, with variable CTO from 2,700 K to 8,000 K and tungsten lamp emulation. It draws a maximum of 220 W, has powerCON TRUE1 and 5-pin XLR in and out, and weighs 5.7 kg.

View details →
Robe ColorSpot 250AT

Robe ColorSpot 250AT

The Robe ColorSpot 250 AT is a moving head spot fixture running a compact metal halide lamp on a magnetic ballast, with a GY9.5 base and the Philips MSD 250/2 as the approved lamp. It carries a 10-filter SLOT&LOCK colour wheel plus open, a rotating wheel of 7 indexable SLOT&LOCK glass gobos plus open, an interchangeable 3-facet rotating prism, motorised focus and full-range dimming with strobe. Control is DMX-512 with RDM on 3-pin and 5-pin XLR in four modes of 14, 16, 18 or 20 channels. Pan is 530°, tilt 280°, the standard objective 15°, and the EU model weighs 20.5 kg.

View details →

Need it for your event?