Anytronics Dimmer / Distro Rack - 3 x DP610 (Series 192)
Specifications
- 18 x 10 A dimmer channels (3 x DP610, one pack per phase)
- 6 dimmed Socapex outlets, 2 per pack
- 63 A three-phase in; 63 A 1Ø, 32 A 3Ø, 3 x 16 A and 3 x 13 A out
The Anytronics dimmer and distribution rack is a one-off 19" rack holding three Anytronics DP610 Series 192 dimming packs, giving 18 channels at 10 A with two dimmed Socapex outlets per pack and each pack fed from a separate phase. Anytronics list Socapex among the rear output socket options on Series 192 packs, alongside a circuit breaker on every output channel and a choice of one or two DMX inputs. The rack takes a 63 A three-phase inlet and carries metered mains distribution: one 63 A single-phase and one 32 A three-phase outlet, plus three 16 A and three 13 A outlets.
Available for hire across Birmingham and the UK. Need advice? Call 0121 333 7711 or send an enquiry.
More Lighting Equipment
Avolites Tiger Touch Pro
The Avolites Tiger Touch Pro is a touchscreen lighting console running the Titan operating software, listed by Avolites as the LV-67H hardware version of the Tiger Touch (serial numbers TT-01220 to TT-01615). The console outputs 12 DMX universes and 6,144 channels, and can be extended to 64 universes with a Titan Net Processor, with Art-Net and CITP support. The rear panel carries four DMX outputs on XLR, MIDI in and out and an SMPTE input. Twenty submasters hold cues, cue lists and chases, alongside ten macro buttons and 1,000 virtual playback executors.
View details →
Robe Led Beam 150
The Robe LEDBeam 150 is a compact LED moving head using 7 x 40 W RGBW multichip LEDs behind a motorised zoom covering 3.8° to 60°. Pan is 450° and tilt 228°, and it runs DMX-512 and RDM in two modes of 22 or 16 control channels, with 8 or 16-bit resolution on pan/tilt, colour, zoom and dimmer. Colour mixing can be RGBW or CMY, with variable CTO from 2,700 K to 8,000 K and tungsten lamp emulation. It draws a maximum of 220 W, has powerCON TRUE1 and 5-pin XLR in and out, and weighs 5.7 kg.
View details →
Robe ColorSpot 250AT
The Robe ColorSpot 250 AT is a moving head spot fixture running a compact metal halide lamp on a magnetic ballast, with a GY9.5 base and the Philips MSD 250/2 as the approved lamp. It carries a 10-filter SLOT&LOCK colour wheel plus open, a rotating wheel of 7 indexable SLOT&LOCK glass gobos plus open, an interchangeable 3-facet rotating prism, motorised focus and full-range dimming with strobe. Control is DMX-512 with RDM on 3-pin and 5-pin XLR in four modes of 14, 16, 18 or 20 channels. Pan is 530°, tilt 280°, the standard objective 15°, and the EU model weighs 20.5 kg.
View details →